X6CrMoNb 17-1 1.4526 - EN 10088-3-2014

Grade	X6CrMoNb 17-1
European Standard Steel Grade	1.4526
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X6CrMoNb 17-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	N	More
Minimum Value	-	-	-	-	-	16	0.8	-	Nb：[7x(C+N)+0.10]~1.00
Maximum Value	0.08	1	1	0.04	0.015	18	1.4	0.04	Nb：[7x(C+N)+0.10]~1.00

X6CrMoNb 17-1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar, rod, wire, section, bright products; d≤50	+A	480~680	≥300	≥15	≤200
Cold drawn, precision bar; d≤10	+A	540~700	≥340	≥8
Cold drawn, precision bar; 10<d≤16	+A	500~700	≥320	≥12
Cold drawn, precision bar; 16<d≤40	+A	440~700	≥280	≥15
Cold Drawn, Precision Finished Bar; 40<d≤50	+A	440~700	≥280	≥15

Approximate Comparison Table Ferritic Stainless Steel

China	United States	International Organization for Standardization		European Standard
ISC	UNS	ISO	Numerical Grade	EN	Numerical Grade
S11770	S43600	X6CrMoNb17-1	4526-436-00-I	X6CrMoNb17-1	1.4526

X6CrMoNb17-1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!