X2CrMoTiS 18-2 1.4523 - EN 10088-3-2014

Grade	X2CrMoTiS 18-2
European Standard Steel Grade	1.4523
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X2CrMoTiS 18-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	More
Minimum Value	-	-	-	-	0.15	17.5	2	(C+N)≤0.040；Ti:[4x(C+N) + 0.15] ~0.8*
Maximum Value	0.03	1	0.5	0.04	0.35	19	2.5	(C+N)≤0.040；Ti:[4x(C+N) + 0.15] ~0.8*

X2CrMoTiS 18-2 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars, rods, wires, profiles, bright products; d≤100	430~600	≥280	≥15	≤200

Approximate Comparison Table

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	Numerical Grade
S18235	X2CrMoTiS18-2	4523-182-35-I	1.4523

X2CrMoTiS18-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!