X15Cr 13 1.4024 - EN 10088-3-2014

Grade	X15Cr 13
European Standard Steel Grade	1.4024
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

X15Cr 13 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S ^ⓑ	Cr
Minimum Value	0.12	-	-	-	-	12
Maximum Value	0.17	1	1	0.04	0.03	14

X15Cr 13 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar, rod, wire, section, bright products	+A	≤730			≤220
Bar, rod, wire, section, bright products; d≤160	+QT650	650~850	≥450	(long.) ≥15

1 Approximate Comparison Table Martensitic Stainless Steel

2 Approximate Comparison Table Martensitic Heat-Resistant Steel

China		Taiwan, China	Japan	South Korea	International Organization for Standardization	Germany		United Kingdom
GB	ISC	CNS	JIS	KS	ISO	DIN EN/DIN	W-Nr.	BS EN/BS
13Cr13Mo (1Cr13Mo)	S45710	410J1	SUS 410J1	STS 410J1	X12CrMo 12-6	X15Cr 13	1.4024	420S29

3 Approximate Comparison Table Martensitic Stainless Steel

Japan	International Organization for Standardization		European Standard
JIS	ISO	Numerical Grade	Numerical Grade
SUS410	X15Cr13	4024-410-09-E	1.4024

4 Approximate Comparison Table Corrosion-Resistant Cast Steels

X15Cr13 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!