X39CrMo 17-1 1.4122 - EN 10088-3-2014

Grade	X39CrMo 17-1
European Standard Steel Grade	1.4122
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X39CrMo 17-1 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S ^ⓐ	Cr	Ni	Mo
Minimum Value	0.33	-	-	-	-	15.5	-	0.8
Maximum Value	0.45	1	1.5	0.04	0.03	17.5	1	1.3

X39CrMo 17-1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products	+A	≤900			≤280
Bars, rods, wire, profiles, bright products; d≤60	+QT750	750~950	≥550	(long.) ≥12		(long.) ≥15
Bars, rods, wire, profiles, bright products; 60<d≤160	+QT750	750~950	≥550	≥12		≥10
Cold drawn, precision bar; d≤10	+QT750	800~1050	≥650	≥8
Cold drawn, precision bar; 10<d≤16	+QT750	800~1050	≥600	≥8
Cold drawn, precision bar; 16<d≤40	+QT750	750~1000	≥550	≥10		≥14
Cold drawn, precision bar; 40<d≤63	+QT750	750~950	≥550	≥12		≥14
Cold drawn, precision bar; 63<d≤160	+QT750	750~950	≥550	≥12		≥10
Cold drawn, precision bar; d≤10	+A	≤1000			≤340
Cold drawn, precision bar; 10<d≤16	+A	≤1000			≤340
Cold drawn, precision bar; 16<d≤40	+A	≤980			≤310
Cold drawn, precision bar; 40<d≤63	+A	≤930			≤290
Cold drawn, precision bar; 63<d≤160	+A	≤900			≤280

Approximate Comparison Table Martensitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X39CrMo17-1	4122-434-09-I	X39CrMo17-1	1.4122

X39CrMo17-1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!