X2CrNiMoV 13-5-2 1.4415 - EN 10088-3-2014

Grade	X2CrNiMoV 13-5-2
European Standard Steel Grade	1.4415
Corresponding Standard	EN 10088-3-2014 Stainless Steels-Part 3: Technical Delivery Conditions for Semi-Finished Products, Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X2CrNiMoV 13-5-2 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S	Cr	Ni	Mo	Ti	V
Minimum Value	-	-	-	-	-	11.5	4.5	1.5	-	0.1
Maximum Value	0.03	0.5	0.5	0.04	0.015	13.5	6.5	2.5	0.01	0.5

X2CrNiMoV 13-5-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+QT750	750~900	≥650	(long.) ≥18	(long.) ≥100
Bar, rod, wire, section, bright products; d≤160	+QT850	850~1000	≥750	≥15	≥80

X2CrNiMoV13-5-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!