X1CrNiMoAlTi12-11-2 1.4612 - EN 10088-3-2014

Grade	X1CrNiMoAlTi12-11-2
European Standard Steel Grade	1.4612
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Precipitation-Hardening Stainless Steel
Properties	Strength Corrosion Resistance
Density	7.7 g/cm³

X1CrNiMoAlTi12-11-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	Ti	Al
Minimum Value	-	-	-	-	-	11	10.2	1.75	-	0.2	1.35
Maximum Value	0.015	0.1	0.1	0.01	0.005	12.5	11.3	2.25	0.01	0.5	1.75

X1CrNiMoAlTi12-11-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bars, rods, wire rods, profiles, bright products; d≤150	+AT				≤331
Bars, rods, wire rods, profiles, bright products; d≤150	+P1510	≥1510	≥1380	(long.) ≥10		(long.) ≥20
Bars, rods, wire rods, profiles, bright products; d≤150	+P1650	≥1650	≥1515	≥10		≥10

X1CrNiMoAlTi12-11-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!