X1NiCrMoCu25-20-5 1.4539 - EN 10088-3-2014

Grade	X1NiCrMoCu25-20-5
European Standard Steel Grade	1.4539
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X1NiCrMoCu25-20-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	19	24	1.2	4	-
Maximum Value	0.02	0.7	2	0.03	0.01	21	26	2	5	0.15

X1NiCrMoCu25-20-5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	530~730	≥230	(long.) ≥35	≤230	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	530~730	≥230	(tr.) ≥30	≤230	(tr.) ≥60
Cold drawn, precision bar; d≤10	+AT	600~930	≥400	(long.) ≥20
Cold drawn, precision bar; 10<d≤16	+AT	600~930	≥400	≥20
Cold drawn, precision bar; 16<d≤40	+AT	530~880	≥230	≥25		(long.) ≥100
Cold drawn, precision bar; 40<d≤63	+AT	530~880	≥230	≥25		≥100
Cold drawn, precision bar; 63<d≤160	+AT	530~730	≥230	≥35		≥100
Cold Drawn, Precision Finished Bars; 160<d≤250	+AT	530~730	≥230	(tr.) ≥30		(tr.) ≥60
Cold drawn wire; d≥0.05	+C500	500~700
Cold drawn wire; d≥0.05	+C600	600~800
Cold drawn wire; d≥0.05	+C700	700~900
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; d≥0.05	+C1000	1000~1250
Cold drawn wire; d≥0.05	+C1100	1100~1350
Cold drawn wire; d≥0.05	+C1200	1200~1450
Cold drawn wire; d≥0.05	+C1400	1400~1700
Cold drawn wire; d≥0.05	+C1600	1600~1900
Cold drawn wire; d≥0.05	+C1800	1800~2100
Cold drawn wire; 0.05<d≤0.1	+AT	≤1100		(long.) ≥20
Cold drawn wire; 0.1<d≤0.2	+AT	≤1050		≥20
Cold drawn wire; 0.2<d≤0.5	+AT	≤1000		≥30
Cold drawn wire; 0.5<d≤1	+AT	≤950		≥30
Cold drawn wire; 1<d≤3	+AT	≤900		≥30
Cold drawn wire; 3<d≤5	+AT	≤850		≥35
Cold-drawn wire; 5<d≤16	+AT	≤800		≥35

Approximate Comparison Table

China		Japan	United States		International Organization for Standardization		France	European Standard		Sweden	United Kingdom
GB	ISC	JIS	ASTM/AISI	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
015Cr21Ni26Mo5Cu2	S31782	SUS 890L	904L	N08904	X1NiCrMoCu25-20-5	4539-089-04-I	Z2NCDU25-20	X1NiCrMoCu25-20-5	1.4539	2562	904S13

X1NiCrMoCu25-20-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!