X6CrMnNiN18-13-3 1.4378 - EN 10088-3-2014

Grade	X6CrMnNiN18-13-3
European Standard Steel Grade	1.4378
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X6CrMnNiN18-13-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	11.5	-	-	17	2.3	0.2
Maximum Value	0.08	1	14.5	0.06	0.03	19	3.7	0.4

X6CrMnNiN18-13-3 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	690~830	≥380	(long.) ≥30	≤220	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	690~830	≥380	(tr.) ≥30	≤220	(tr.) ≥60
Cold drawn, precision bar; d≤10	+AT	720~950	≥450	(long.) ≥20
Cold drawn, precision bar; 10<d≤16	+AT	700~900	≥400	≥25
Cold drawn, precision bar; 16<d≤40	+AT	690~880	≥380	≥30		(long.) ≥100
Cold drawn wire; d≥0.05	+C500	500~700
Cold drawn wire; d≥0.05	+C600	600~800
Cold drawn wire; d≥0.05	+C700	700~900
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; d≥0.05	+C1000	1000~1250
Cold drawn wire; d≥0.05	+C1100	1100~1350
Cold drawn wire; d≥0.05	+C1200	1200~1450
Cold drawn wire; d≥0.05	+C1400	1400~1700
Cold drawn wire; d≥0.05	+C1600	1600~1900
Cold drawn wire; d≥0.05	+C1800	1800~2100
Cold drawn wire; 0.05<d≤0.1	+AT	≤1100		≥20
Cold drawn wire; 0.1<d≤0.2	+AT	≤1050		≥20
Cold drawn wire; 0.2<d≤0.5	+AT	≤1000		≥30
Cold drawn wire; 0.5<d≤1	+AT	≤950		≥30
Cold drawn wire; 1<d≤3	+AT	≤900		≥30
Cold drawn wire; 3<d≤5	+AT	≤850		≥35
Cold-drawn wire; 5<d≤16	+AT	≤800		≥35
Rod	+C800	800~1000	≥650	≥20
Rod	+C900	900~1100	≥750	≥15
Rod	+C1000	1000~1250	≥850	≥12

X6CrMnNiN18-13-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!