X1CrNiMoN25-22-2 1.4466 - EN 10088-3-2014

Grade	X1CrNiMoN25-22-2
European Standard Steel Grade	1.4466
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X1CrNiMoN25-22-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	24	21	2	0.1
Maximum Value	0.02	0.7	2	0.025	0.01	26	23	2.5	0.16

X1CrNiMoN25-22-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	540~740	≥250	(long.) ≥35	≤240	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	540~740	≥250	(tr.) ≥30	≤240	(tr.) ≥60
Cold drawn wire; d≥0.05	+C500	500~700
Cold drawn wire; d≥0.05	+C600	600~800
Cold drawn wire; d≥0.05	+C700	700~900
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; d≥0.05	+C1000	1000~1250
Cold drawn wire; d≥0.05	+C1100	1100~1350
Cold drawn wire; d≥0.05	+C1200	1200~1450
Cold drawn wire; d≥0.05	+C1400	1400~1700
Cold drawn wire; d≥0.05	+C1600	1600~1900
Cold drawn wire; d≥0.05	+C1800	1800~2100
Cold drawn wire; 0.05<d≤0.1	+AT	≤1100		(long.) ≥20
Cold drawn wire; 0.1<d≤0.2	+AT	≤1050		≥20
Cold drawn wire; 0.2<d≤0.5	+AT	≤1000		≥30
Cold drawn wire; 0.5<d≤1	+AT	≤950		≥30
Cold drawn wire; 1<d≤3	+AT	≤900		≥30
Cold drawn wire; 3<d≤5	+AT	≤850		≥35
Cold-drawn wire; 5<d≤16	+AT	≤800		≥35

1 Approximate Comparison Table Austenitic Stainless Steel

China		United States		International Organization for Standardization	Germany		France	European Standard
GB	ISC	ASTM	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
022Cr25Ni22Mo2N	S31053	310MoLN	S31050	X1CrNiMoN 25-22-2	X1CrNiMoN 25-22-2	1.4466	X1CrNiMoN 25-22-2	X1CrNiMoN 25-22-2	1.4466

2 Approximate Comparison Table Austenitic Stainless Steel

X1CrNiMoN25-22-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!