X6Cr13 1.4000 - DIN EN 10088-3-2014

Grade	X6Cr13
Germany W-Nr.	1.4000
Corresponding Standard	DIN EN 10088-3-2014 Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X6Cr13 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓑ	Cr
Minimum Value	-	-	-	-	-	12
Maximum Value	0.08	1	1	0.04	0.03	14

① Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X6Cr13 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
bars,rods,wire,sections,bright products;d≤25	+A	400~630	≥230	≥20	≤200

+AT=solution annealed；+A=annealed；+QT = quenched and tempered；+P=precipitation hardening；+C=Cold worked，+Csuffix followed by a number represents the tensile strength grade, i.e., the minimum tensile strength value.
long.=longitudinal；tr.=transverse
d=diameter or thickness；Unit mm

Resistance to intergranular corrosion: in the delivery condition: no；in the welded condition: no

New and Old Grade Replacement List

Corresponding Standard	Grade
DIN 17440-1972	Grade Germany W-Nr. Other Name
DIN EN 10088-3-2014	Grade Germany W-Nr.

Approximate Comparison Table Martensitic Stainless Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

European Standard

ISC

CNS

JIS

ASTM

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

Numerical Grade

06Cr13
(0Cr13)

S41008

410S

SUS 410S

STS 410S

410S

S41008

X6Cr 13

X6Cr 13
(X7Cr 13)

1.4000

Z6C 13

X6Cr 13

1.4000

X6Cr13 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X6Cr13 1.4000
2	ISO 4955-2005
	X6Cr13 (2)
3	ISO TS 15510-2003
	X6Cr13
4	DIN 17440-1972
	X6Cr 13 X7Cr 13 1.4000
5	EN 10088-3-2014
	X6Cr13 1.4000
6	ISO 15510-2014
	X6Cr13 4000-410-08-I
7	DIN EN 10088-3-2014
	X6Cr13 1.4000
8	ISO 4955-2016
	X6Cr13 4000-410-08-I (2)
9	NF EN 10088-2-2005
	X6Cr13 1.4000
10	NF EN 10088-1-2005
	X6Cr13 1.4000

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!