X6CrMoS17 1.4105 - EN 10088-3-2014

Grade	X6CrMoS17
European Standard Steel Grade	1.4105
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance Machinability

X6CrMoS17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo
Minimum Value	-	-	-	-	0.15	16	0.2
Maximum Value	0.08	1.5	1.5	0.04	0.35	18	0.6

X6CrMoS17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars, rods, wires, profiles, bright products; d≤100	+A	430~630	≥250	≥20	≤200
Cold drawn, precision bar; d≤10	+A	530~780	≥330	≥7
Cold drawn, precision bar; 10<d≤16	+A	500~780	≥310	≥7
Cold drawn, precision bar; 16<d≤40	+A	430~730	≥250	≥12
Cold drawn, precision bar; 40<d≤63	+A	430~730	≥250	≥12
Cold drawn, precision processed bar stock; 63 < d ≤ 100	+A	430~630	≥250	≥20
Cold drawn wire; d≥0.05	+C500	500~700
Cold drawn wire; d≥0.05	+C600	600~800
Cold drawn wire; d≥0.05	+C700	700~900
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; 0.05<d≤0.1	+A	≤950		≥10
Cold drawn wire; 0.1<d≤0.2	+A	≤900		≥10
Cold drawn wire; 0.2<d≤0.5	+A	≤850		≥15
Cold drawn wire; 0.5<d≤1	+A	≤850		≥15
Cold drawn wire; 1<d≤3	+A	≤800		≥15
Cold drawn wire; 3<d≤5	+A	≤750		≥15
Cold-drawn wire; 5<d≤16	+A	≤700		≥20

X6CrMoS17 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!