X2CrTi 17 1.4520 - DIN EN 10088-3-2014

Grade	X2CrTi 17
Germany W-Nr.	1.4520
Corresponding Standard	DIN EN 10088-3-2014 Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X2CrTi 17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	N	More
Minimum Value	-	-	-	-	-	16	-	Ti:[4x(C+N) + 0.15] ~0.80*
Maximum Value	0.025	0.5	0.5	0.04	0.015	18	0.015	Ti:[4x(C+N) + 0.15] ~0.80*

① Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X2CrTi 17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar, rod, wire, section, bright products; d≤50	+A	420~620	≥200	≥20	≤200
Cold drawn, precision bar; d≤10	+A	500~750	≥320	≥8
Cold drawn, precision bar; 10<d≤16	+A	480~750	≥300	≥10
Cold drawn, precision bar; 16<d≤40	+A	400~700	≥240	≥15
Cold Drawn, Precision Finished Bar; 40<d≤50	+A	400~700	≥240	≥15

+AT=solution annealed；+A=annealed；+QT = quenched and tempered；+P=precipitation hardening；+C=Cold worked，+Csuffix followed by a number represents the tensile strength grade, i.e., the minimum tensile strength value.
long.=longitudinal；tr.=transverse
d=diameter or thickness；Unit mm

X2CrTi17 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrTi 17 1.4520
2	EN 10088-3-2014
	X2CrTi 17 1.4520
3	ISO 15510-2014
	X2CrTi17 4520-430-70-I
4	ISO 9328-7-2018
	X2CrTi17
5	DIN EN 10088-3-2014
	X2CrTi 17 1.4520
6	NF EN 10088-2-2005
	X2CrTi17 1.4520
7	NF EN 10088-1-2005
	X2CrTi17 1.4520
8	NF EN 10028-7-2008
	X2CrTi17 1.4520
9	NF EN 10028-7-2000
	X2CrTi17 1.4520

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!