X3CrNb 17 1.4511 - EN 10088-3-2014

Grade	X3CrNb 17
European Standard Steel Grade	1.4511
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X3CrNb 17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓑ	Cr	More
Minimum Value	-	-	-	-	-	16	Nb: 12xC~1
Maximum Value	0.05	1	1	0.04	0.03	18	Nb: 12xC~1

X3CrNb 17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar, rod, wire, section, bright products; d≤50	+A	420~620	≥200	≥20	≤200
Cold drawn, precision bar; d≤10	+A	500~750	≥320	≥8
Cold drawn, precision bar; 10<d≤16	+A	480~750	≥300	≥10
Cold drawn, precision bar; 16<d≤40	+A	400~700	≥240	≥15
Cold Drawn, Precision Finished Bar; 40<d≤50	+A	400~700	≥240	≥15
Cold drawn wire; d≥0.05	+C500	500~700
Cold drawn wire; d≥0.05	+C600	600~800
Cold drawn wire; d≥0.05	+C700	700~900
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; 0.05<d≤0.1	+A	≤950		≥10
Cold drawn wire; 0.1<d≤0.2	+A	≤900		≥10
Cold drawn wire; 0.2<d≤0.5	+A	≤850		≥15
Cold drawn wire; 0.5<d≤1	+A	≤850		≥15
Cold drawn wire; 1<d≤3	+A	≤800		≥15
Cold drawn wire; 3<d≤5	+A	≤750		≥15
Cold-drawn wire; 5<d≤16	+A	≤700		≥20

Approximate Comparison Table Ferritic Stainless Steel

Japan	International Organization for Standardization		European Standard
JIS	ISO	Numerical Grade	Numerical Grade
SUS430LX	X3CrNb17	4511-430-71-I	1.4511

X3CrNb17 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!