Grade CuBe2
European Standard Steel Grade CW101C
Corresponding Standard EN 12166-2016
Copper and Copper Alloys - Wire for General Purposes
Classification Copper and Copper Alloys
Density 8.3 g/cm3
CuBe2 Chemical Element Composition Content (%)
Component Fe Be Ni Co Other Total More
Minimum Value - 1.8 - - - Cu:余量
Maximum Value 0.2 2.1 0.3 0.3 0.5
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuBe2 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
1.5<d≤10 CuBe2-H350 H350 HV
350~420
1.5<d≤10 CuBe2-H370 H370 370~440
0.2<d≤10 CuBe2-R1150 R1150 ≥1150 ≥1000 ≥2(A)
0.2<d≤10 CuBe2-R1300 R1300 ≥1300 ≥1100 ≥2(A)
All specifications CuBe2-M M No specification No specification No specification No specification
1 Approximate Comparison Table Processing of High Copper Alloys
China Japan United States International Organization for Standardization Germany European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
TBe2
QBe2
T17720 C1720
C17200
97.8Cu-1.9Be-.3Co C17200 CuBe2 C17200 CuBe2 C17200
2.1247
CuBe2 CW101C БрБН2
2 Approximate Comparison Table Copper and Copper Alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuBe2 2.1247 CuBe2 CW101C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!