CuBe2P CW102C - EN 12166-2016

Grade	CuBe2P
European Standard Steel Grade	CW102C
Corresponding Standard	EN 12166-2016 Copper and Copper Alloys - Wire for General Purposes
Classification	Copper and Copper Alloys
Density	8.3 g/cm³

CuBe2P Chemical Element Composition Content (%)

Component	Fe	Be	Ni	Co	Pb	Other Total	More
Minimum Value	-	1.8	-	-	0.2	-	Cu:余量
Maximum Value	0.2	2	0.3	0.3	0.6	0.5	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuBe2P Mechanical Properties

diameter* d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
1.5<d≤10	CuBe2P-H350	H350				HV 350~420
1.5<d≤10	CuBe2P-H370	H370				370~440
0.2<d≤10	CuBe2P-R1150	R1150	≥1150	≥1000	≥2(A)
0.2<d≤10	CuBe2P-R1300	R1300	≥1300	≥1100	≥2(A)
All specifications	CuBe2P-M	M	No specification	No specification	No specification	No specification

1 Approximate Comparison Table Processing of High Copper Alloys

China		Japan	United States		International Organization for Standardization		Germany		European Standard		Russia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
TBe1.9-0.4	T17300	C1730 C17300	97.7Cu-1.9Be-.4Pb	C17300	CuBe2Pb	C17300	CuBe2Pb	C17300 2.1248	CuBe2Pb	CW102C	БрЫС1.9-0.4

2 Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
CuBe2Pb	2.1248	CuBe2Pb	CW102C

CuBe2P Corresponding Standards(Same grade name, different standards)

1	EN 12166-2016
	CuBe2P CW102C
2	DIN EN 12166-2016
	CuBe2P CW102C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!