CuCo1Ni1Be CW103C - EN 12166-2016

Grade	CuCo1Ni1Be
European Standard Steel Grade	CW103C
Corresponding Standard	EN 12166-2016 Copper and Copper Alloys - Wire for General Purposes
Classification	Copper and Copper Alloys
Density	8.3 g/cm³

CuCo1Ni1Be Chemical Element Composition Content (%)

Component	Fe	Be	Ni	Co	Other Total	More
Minimum Value	-	0.4	0.8	0.8	-	Cu:余量
Maximum Value	0.2	0.7	1.3	1.3	0.5	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuCo1Ni1Be Mechanical Properties

diameter* d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
1.5<d≤10	CuCo1Ni1Be-H230	H230				HV 230~290
1.5<d≤10	CuCo1Ni1Be-H240	H240				240~330
1<d≤10	CuCo1Ni1Be-R680	R680	≥680	≥550	≥3(A100) ≥6(A11.3) ≥10(A)
1<d≤10	CuCo1Ni1Be-R730	R730	≥730	≥610	≥2(A100) ≥5(A11.3) ≥8(A)
All specifications	CuCo1Ni1Be-M	M	No specification	No specification	No specification	No specification

CuCo1Ni1Be Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuCo1Ni1Be CW103C
2	EN 12166-1998
	CuCo1Ni1Be CW103C
3	EN 12166-2016
	CuCo1Ni1Be CW103C
4	DIN EN 12163-1998
	CuCo1Ni1Be CW103C
5	DIN EN 12163-2016
	CuCo1Ni1Be CW103C
6	DIN EN 12166-2016
	CuCo1Ni1Be CW103C
7	DIN EN 12166-1998
	CuCo1Ni1Be CW103C
8	EN 12163-2016
	CuCo1Ni1Be CW103C
9	GB /T 20078-2006
	CuCo1Ni1Be CW103C
10	EN 12167-2024
	CuCo1Ni1Be CW103C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!