Grade CuNi1Si
European Standard Steel Grade CW109C
Corresponding Standard EN 12166-2016
Copper and copper alloys - Wire for general purposes
Classification Copper and Copper Alloys
Density 8.9 g/cm3
CuNi1Si Chemical Element Composition Content (%)
Component Fe Si Mn Ni Pb Other Total More
Minimum Value - 0.4 - 1 - - Cu:余量
Maximum Value 0.2 0.7 0.1 1.6 0.02 0.3
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuNi1Si Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
1.5<d≤15 CuNi1Si-H130 H130 HV
130~190
1.5<d≤15 CuNi1Si-H150 H150 150~200
1.5<d≤12 CuNi1Si-H170 H170 170~220
1.5<d≤15 CuNi1Si-R440 R440 ≥440 ≥300 ≥6(A100)
≥8(A11.3)
≥16(A)
1.5<d≤15 CuNi1Si-R540 R540 ≥540 ≥470 ≥4(A100)
≥6(A11.3)
≥12(A)
1.5<d≤12 CuNi1Si-R590 R590 ≥590 ≥540 ≥3(A100)
≥5(A11.3)
≥10(A)
All specifications CuNi1Si-M M No specification No specification No specification No specification
1 Approximate Comparison Table cupronickel
China Japan United States International Organization for Standardization Germany France European Standard Russia
ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
C19010 C1901
C19010
98Cu-1.5Ni-.5Si C19010 CuNi1Si C19010 CuNi1Si
(CuNi1.51Si)
CW109C
(2.0853)
CuNi1Si
CW109C
CuNi1Si CW109C МНК1.5-0.5
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuNi1.5Si 2.0853 CuNi1Si CW109C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!