C35E 1.1181 - DIN EN 10269-2014

Grade	C35E
Germany W-Nr.	1.1181
Corresponding Standard	DIN EN 10269-2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Carbon Steel
Density	7.85 g/cm³

C35E Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^*	Cr	Ni	Mo	More
Minimum Value	0.32	-	0.5	-	-	-	-	-	Cr+Mo+Ni： ≤0.63
Maximum Value	0.39	0.4	0.8	0.03	0.015	0.4	0.4	0.1	Cr+Mo+Ni： ≤0.63

C35E Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Impact Energy Absorption KV2 J
d≤60	+N	500~650	≥300	≥20	-	≥27
d≤60	+QT	500~650	≥300	≥22	≥45	≥55
60<d≤150	+QT	500~650	≥300	≥22	≥45	≥39

New and Old Grade Replacement List

Approximate Comparison Table

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Russia

Sweden

United Kingdom

ISC

CNS

JIS

ASTM/AISI

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

GOST

BS EN/BS

U20352

S35C

SM35C

1035

G10350

C35E4

C35E
Ck35

1.1181

C35E
XC38

1572

C35E
080M36

C35E Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!