X19CrMoNbVN 11-1 1.4913 - DIN EN 10269-2014

Grade	X19CrMoNbVN 11-1
Germany W-Nr.	1.4913
Corresponding Standard	DIN EN 10269-2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Alloy Steel
Properties	Strength Corrosion Resistance
Density	7.7 g/cm³

X19CrMoNbVN 11-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	V	Nb	B	Al
Minimum Value	0.17	-	0.4	-	-	10	0.2	0.5	0.05	0.1	0.25	-	-
Maximum Value	0.23	0.5	0.9	0.025	0.015	11.5	0.6	0.8	0.1	0.3	0.55	0.0015	0.02

X19CrMoNbVN 11-1 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
-*	+A	-	-	-	-	≤302	-
d≤160**	+QT	900~1050	≥750	≥12	≥40	-	≥20

X19CrMoNbVN11-1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!