中文版
Home Material DIN EN 10269-2014
简体 | 繁體
Grade X3CrNiCu 18-9-4
Germany W-Nr. 1.4567
Corresponding Standard DIN EN 10269-2014
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 7.9 g/cm3
X3CrNiCu 18-9-4 Chemical Element Composition Content (%)
Component C Si Mn P S * Cr Ni Cu N
Minimum Value - - - - - 17 8.5 3 -
Maximum Value 0.04 1 2 0.045 0.015 19 10.5 4 0.1
X3CrNiCu 18-9-4 Mechanical Properties
diameter
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
d≤160 +AT 450~650 ≥175 ≥45 ≥100
d≤35 +C700 700~850 ≥350 ≥20 ≥80
Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard
GB ISC CNS JIS KS ASTM/AISI UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
06Cr18Ni9Cu3 S30488 XM7 SUS XM7 STS XM7 XM7 S30430 X3CrNiCu 18-9-4 4567-304-30-I X3CrNiCu 18-9 1.4567 Z3CNU 18-10 X3CrNiCu 18-9-4 1.4567
X3CrNiCu18-9-4 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiCu 18-9-4 1.4567
2 EN 10263-5-2001
X3CrNiCu18-9-4 1.4567
3 EN 10269-2006
X3CrNiCu18-9-4 1.4567
4 ISO TS 15510-2003
X3CrNiCu18-9-4
5 EN 10088-3-2005
X3CrNiCu18-9-4 1.4567
6 EN 10269-2013
X3CrNiCu 18-9-4 1.4567
7 EN 10088-3-2014
X3CrNiCu18-9-4 1.4567
8 ISO 15510-2014
X3CrNiCu18-9-4 4567-304-30-I
9 NF EN 10269-1999
X3CrNiCu18-9-4 1.4567
10 DIN EN 10263-5-2018
X3CrNiCu18-9-4 1.4567
11 DIN EN 10269-2014
X3CrNiCu 18-9-4 1.4567
12 DIN EN 10088-3-2014
X3CrNiCu18-9-4 1.4567
13 ISO 4954-2018
X3CrNiCu18-9-4 4567-304-30-I
14 NF EN 10088-1-2005
X3CrNiCu18-9-4 1.4567
15 EN 10263-5-2017
X3CrNiCu18-9-4 1.4567
16 ISO 4954-2-2024
X3CrNiCu18-9-4 4567-304-30-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!