X6CrNi 25-20 1.4951 - DIN EN 10269-2014

Grade	X6CrNi 25-20
Germany W-Nr.	1.4951
Corresponding Standard	DIN EN 10269-2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.85 g/cm³

X6CrNi 25-20 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^*	Cr	Ni	N
Minimum Value	0.04	-	-	-	-	24	19	-
Maximum Value	0.08	0.7	2	0.035	0.015	26	22	0.1

X6CrNi 25-20 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
d≤160	+AT	510~750	≥200	≥35	≥100

X6CrNi25-20 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!