X6CrNiTiB 18-10 1.4941 - DIN EN 10269-2014

Grade	X6CrNiTiB 18-10
Germany W-Nr.	1.4941
Corresponding Standard	DIN EN 10269-2014 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X6CrNiTiB 18-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	B	More
Minimum Value	0.04	-	-	-	-	17	9	0.0015	Ti： 5 × C ~ 0.80
Maximum Value	0.08	1	2	0.035	0.015	19	12	0.005	Ti： 5 × C ~ 0.80

X6CrNiTiB 18-10 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
d≤160	+AT	490~680	≥195	≥35	≥100

X6CrNiTiB18-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!