C35 1.0501 - DIN 17240-1976

Grade	C35
Germany W-Nr.	1.0501
Corresponding Standard	DIN 17240-1976 Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts
Classification	Carbon Steel

C35 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.32	0.15	0.5	-	-
Maximum Value	0.39	0.35	0.8	0.045	0.045

C35 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
d≤100	Normalizing (N)	500~650	≥280	≥21
d≤160	Quenched and Tempered (V)	500~650	≥280	≥22	≥40

1 Approximate Comparison Table Non-Alloy Steel for Quenching and Tempering

United States	International Organization for Standardization	Germany	France	European Standard		United Kingdom
ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	BS EN/BS
1035	C35R C35M2	C35 Cm35	XC38H1u	C35R	1.1180	080M36

2 Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
35	S35C	1035 Gr.1035	C35 C35E4	C35	1.0501	AF55C35 C35	C35	1.0501	35 40	1550	070M36 40HS

3 Approximate Comparison Table High-Quality Carbon Structural Steel

C35 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!