中文版
Home Material DIN 17200-1987
简体 | 繁體
Grade Cm25
Germany W-Nr. 1.1163
Corresponding Standard DIN 17200-1987
Steels for Quenching and Tempering; Technical Delivery Conditions
Classification Carbon Steel
Cm25 Chemical Element Composition Content (%)
Component C Si Mn P S
Minimum Value 0.22 - 0.4 - 0.02
Maximum Value 0.29 0.4 0.7 0.035 0.035
Cm25 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Reduction of Area
ψ
% 		Hardness
HBW 		Impact Energy Absorption
KV2
J
Steel; All Sizes Softening Annealing (G) ≤156
Steel; d≤16 Quenching and Tempering (V) 550~700 ≥370 ≥19 ≥45 ISO-V
≥45
Steel; 16<d≤40 Quenching and Tempering (V) 500~650 ≥320 ≥21 ≥50 ≥45
Flat steel; d≤16 Normalizing (N) 420~570 ≥260 Longitudinal
≥25
Flat steel; 16<d≤100 Normalizing (N) 420~570 ≥240 ≥25
Flat Steel; 100<d≤160 Normalizing (N) 400~550 ≥220 ≥23
New and Old Grade Replacement List
Corresponding Standard Grade
DIN 17200-1987
Grade
Germany W-Nr.
DIN EN ISO 683-1-2018
Grade

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!