NiCr 20 TiAl - ISO 683-15-1992

Grade	NiCr 20 TiAl
Corresponding Standard	ISO 683-15-1992 Valve steels for internal combustion engines
Classification	Nickel and Nickel Alloys

NiCr 20 TiAl Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	B	Co	Al
Minimum Value	-	0.04	-	-	-	-	18	65	-	1.8	-	-	1
Maximum Value	3	0.1	1	1	0.02	0.015	21	-	0.2	2.7	0.008	2	1.8

NiCr 20 TiAl Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
Solution Treatment (ST) + Precipitation Hardening (P)	1100~1400	≥725	≥15	≥25	HRC ≥32

Approximate Comparison Table

China	United States	International Organization for Standardization	European Standard
GB	SAE	ISO	EN	Numerical Grade
GH4080A	HEV5	NiCr20TiAl	NiCr20TiAl	2.4952

NiCr20TiAl Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!