C35 - ISO 683-18-2014

C35 Chemical Element Composition Content (%)

Component	C	Si ^①	Mn	P	S	Cr	Ni	Cu	Mo	More
Minimum Value	0.32	0.1	0.5	-	-	-	-	-	-	Cr+Mo+Ni≤0.63
Maximum Value	0.39	0.4	0.8	0.045	0.045	0.4	0.4	0.3	0.1	Cr+Mo+Ni≤0.63

C35 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
5≤t≤10	Cold drawn (+C)	650~1000	≥510	≥6
10＜t≤16	Cold drawn (+C)	600~950	≥420	≥7
16＜t≤40	Cold drawn (+C)	580~880	≥320	≥8
40＜t≤63	Cold drawn (+C)	550~840	≥300	≥9
63＜t≤100	Cold drawn (+C)	520~800	≥270	≥9
16＜t≤100	As-rolled + peeled (+SH)	520~700			156~204

1 Approximate Comparison Table

China	Japan	International Organization for Standardization	European Standard
GB	JIS	ISO	EN	Numerical Grade
35	S35C	C35	C35	1.0501

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
35	S35C	1035 Gr.1035	C35 C35E4	C35	1.0501	AF55C35 C35	C35	1.0501	35 40	1550	070M36 40HS

3 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	NF EN/NF	GOST	BS EN/BS
GB/T 699-1999 35	S35C	1035	ISO 630-1:1987 C35 C35E4 C35M2	C35 XC35	35	060A35

C35 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!