36SMnPb14 - ISO 683-18-2014

36SMnPb14 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Pb
Minimum Value	0.32	-	1.3	-	0.1	0.15
Maximum Value	0.39	0.4	1.7	0.06	0.18	0.35

36SMnPb14 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
5≤t≤10	Cold drawn (+C)	660~960	≥500	≥6
10＜t≤16	Cold drawn (+C)	620~920	≥440	≥6
16＜t≤40	Cold drawn (+C)	600~900	≥390	≥7
40＜t≤63	Cold drawn (+C)	580~840	≥360	≥8
63＜t≤100	Cold drawn (+C)	560~820	≥340	≥9
16＜t≤40	As-rolled + peeled (+SH)	560~750			≤219
40＜t≤63	As-rolled + peeled (+SH)	560~740			≤216
63＜t≤100	As-rolled + peeled (+SH)	550~740			≤216
5≤t≤10	Quenched and tempered and peeled (+QT+SH)	700~850	≥480
10＜t≤16	Quenched and tempered and peeled (+QT+SH)	700~850	≥460
16＜t≤40	Quenched and tempered and peeled (+QT+SH)	670~820	≥420	≥15
40＜t≤63	Quenched and tempered and peeled (+QT+SH)	640~790	≥400	≥16
63＜t≤100	Quenched and tempered and peeled (+QT+SH)	570~720	≥360	≥17
5≤t≤10	Quenched and tempered +Cold drawn (+QT+C)	750~1000	≥525	≥6
10＜t≤16	Quenched and tempered +Cold drawn (+QT+C)	740~990	≥520	≥6
16＜t≤40	Quenched and tempered +Cold drawn (+QT+C)	720~970	≥505	≥8
40＜t≤63	Quenched and tempered +Cold drawn (+QT+C)	680~930	≥475	≥9
63＜t≤100	Quenched and tempered +Cold drawn (+QT+C)	580~840	≥405	≥9

Approximate Comparison Table

United States	International Organization for Standardization	European Standard
SAE	ISO	EN	Numerical Grade
SAE 11L37	36SMnPb14	36SMnPb14	1.0765

36SMnPb14 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!