C10R - ISO 683-18-2014

C10R Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	0.07	0.15	0.3	-	0.02	-	-	-	-
Maximum Value	0.13	0.4	0.6	0.025	0.04	0.4	0.4	0.3	0.1

C10R Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
5≤t≤10	Cold drawn (+C)	460~760	≥350	≥8
10＜t≤16	Cold drawn (+C)	430~730	≥300	≥9
16＜t≤40	Cold drawn (+C)	400~700	≥250	≥10
40＜t≤63	Cold drawn (+C)	350~640	≥200	≥12
63＜t≤100	Cold drawn (+C)	320~580	≥180	≥12
16＜t≤100	As-rolled + peeled (+SH)	310~550			92~163
16＜t≤100	+A+ peeled (+A +SH)				≤131
5≤t≤10	+A+ cold drawn (+A +C)				≤225
10＜t≤16	+A+ cold drawn (+A +C)				≤216
16＜t≤40	+A+ cold drawn (+A +C)				≤207
40＜t≤63	+A+ cold drawn (+A +C)				≤190
63＜t≤100	+A+ cold drawn (+A +C)				≤172

Approximate Comparison Table

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
C10R	C10R	1.1207

C10R Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!