C16E - ISO 683-18-2014

C16E Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	0.12	0.15	0.6	-	-	-	-	-	-
Maximum Value	0.18	0.4	0.9	0.025	0.035	0.4	0.4	0.3	0.1

C16E Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
5≤t≤10	Cold drawn (+C)	520~820	≥400	≥7
10＜t≤16	Cold drawn (+C)	500~800	≥360	≥8
16＜t≤40	Cold drawn (+C)	450~750	≥300	≥9
40＜t≤63	Cold drawn (+C)	400~690	≥260	≥11
63＜t≤100	Cold drawn (+C)	360~620	≥235	≥12
16＜t≤100	As-rolled + peeled (+SH)	350~620			105~184
16＜t≤100	+A+ peeled (+A +SH)				≤156
5≤t≤10	+A+ cold drawn (+A +C)				≤242
10＜t≤16	+A+ cold drawn (+A +C)				≤238
16＜t≤40	+A+ cold drawn (+A +C)				≤222
40＜t≤63	+A+ cold drawn (+A +C)				≤204
63＜t≤100	+A+ cold drawn (+A +C)				≤184

Approximate Comparison Table

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
C16E	C16E	1.1148

C16E Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!