C45R - ISO 683-18-2014

C45R Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	More
Minimum Value	0.42	0.1	0.5	-	0.02	-	-	-	-	Cr+Mo+Ni≤0.63
Maximum Value	0.5	0.4	0.8	0.025	0.04	0.4	0.4	0.3	0.1	Cr+Mo+Ni≤0.63

C45R Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
5≤t≤10	Cold drawn (+C)	750~1050	≥565	≥5
10＜t≤16	Cold drawn (+C)	710~1030	≥500	≥6
16＜t≤40	Cold drawn (+C)	650~1000	≥410	≥7
40＜t≤63	Cold drawn (+C)	630~900	≥360	≥8
63＜t≤100	Cold drawn (+C)	580~850	≥310	≥8
16＜t≤100	As-rolled + peeled (+SH)	580~820			172~241
16＜t≤40	Quenched and tempered and peeled (+QT+SH)	650~800	≥430	≥16		≥25
40＜t≤100	Quenched and tempered and peeled (+QT+SH)	630~780	≥370	≥17		≥25
5≤t≤10	Quenched and tempered + cold drawn (+QT +C)	850~1050	≥595	≥8
10＜t≤16	Quenched and tempered + cold drawn (+QT +C)	810~1010	≥565	≥8
16＜t≤40	Quenched and tempered + cold drawn (+QT +C)	700~900	≥525	≥9
40＜t≤63	Quenched and tempered + cold drawn (+QT +C)	650~850	≥455	≥10
63＜t≤100	Quenched and tempered + cold drawn (+QT +C)	650~850	≥455	≥11

Approximate Comparison Table

United States	International Organization for Standardization	Germany	France	European Standard
ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade
1045	C45R C45M2	Cm45	XC48H1u	C45R	1.1201

C45R Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!