X10CrAlSi7 1.4713 - DIN EN 10095-2018

Grade	X10CrAlSi7
Germany W-Nr.	1.4713
Corresponding Standard	DIN EN 10095-2018 Heat Resisting Steels and Nickel Alloys
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance

X10CrAlSi7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Al
Minimum Value	-	0.5	-	-	-	6	0.5
Maximum Value	0.12	1	1	0.04	0.15	8	1

X10CrAlSi7 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Flat steel; 3 ≤ t ≤ 12	Annealing (+A)	420~620	≥220	long. ≥20	≤192
Flat steel; 3 ≤ t ≤ 12	Annealing (+A)	420~620	≤220	tr. ≥15	≤192
Flat Steel; t<3	Annealing (+A)	420~620	≥220	-	≤192
Flat steel; t ≤ 12	Annealing (+A)	420~620	≥220	Long Products ≥20	≤192

Approximate Comparison Table Ferritic Heat-Resistant Steel

X10CrAlSi7 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!