中文版
Home Material DIN EN 10095-2018
简体 | 繁體
Grade X10CrAlSi13
Germany W-Nr. 1.4724
Corresponding Standard DIN EN 10095-2018
Heat resisting steels and nickel alloys
Classification Ferritic Stainless Steel
Properties Corrosion Resistance
X10CrAlSi13 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Al
Minimum Value - 0.7 - - - 12 0.7
Maximum Value 0.12 1.4 1 0.04 0.015 14 1.2
X10CrAlSi13 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Flat steel; 3 ≤ t ≤ 12 Annealing (+A) 450~650 ≥250 long. tr.
≥15		 ≤192
Flat steel; 0.5≤t<3 Annealing (+A) 450~650 ≥250 long. tr.
≥13		 ≤192
Flat steel; t ≤ 12 Annealing (+A) 450~650 ≥250 Long Products
≥15		 ≤192
Approximate Comparison Table
Japan United States Germany France European Standard United Kingdom
JIS ASTM UNS DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade BS EN/BS
SUH 21 430 S43000 X10CrAl 13
X10CrAlSi 13 		1.4724
1.4724 		Z10C 13 X10CrAlSi 13 1.4724 403S17
X10CrAlSi13 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X10CrAlSi 13 1.4724
2 ISO 4955-2005
X10CrAlSi13 (3)
3 EN 10095-1999
X10CrAlSi13 1.4724
4 DIN EN 10095-2018
X10CrAlSi13 1.4724
5 ISO 15510-2014
X10CrAlSi13 4724-405-77-I
6 ISO 4955-2016
X10CrAlSi13 4724-405-77-I (3)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!