X10CrAlSi25 1.4762 - DIN EN 10095-2018

Grade	X10CrAlSi25
Germany W-Nr.	1.4762
Corresponding Standard	DIN EN 10095-2018 Heat resisting steels and nickel alloys
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X10CrAlSi25 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Al
Minimum Value	-	0.7	-	-	-	23	1.2
Maximum Value	0.12	1.4	1	0.04	0.015	26	1.7

X10CrAlSi25 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar; t≤25	Annealing (+A)	520~720	≥280	≥10	≤223

Approximate Comparison Table Heat-Resistant Stainless Steel

X10CrAlSi25 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!