X9CrNiSiNCe 21-11-2 1.4835 - DIN EN 10095-2018

Grade	X9CrNiSiNCe 21-11-2
Germany W-Nr.	1.4835
Corresponding Standard	DIN EN 10095-2018 Heat resisting steels and nickel alloys
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X9CrNiSiNCe 21-11-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.05	1.4	-	-	-	20	10	0.12	0.03
Maximum Value	0.12	2.5	1	0.045	0.015	22	12	0.2	0.08

X9CrNiSiNCe 21-11-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Flat steel; t≤75	Solid Solution Treatment (+AT)	650~850	≥310	Long Products ≥40	≤210
Flat steel; 0.5≤t<3	Solid Solution Treatment (+AT)	650~850	≥310	long. tr. ≥37	≤210
Flat steel; t ≥ 3	Solid Solution Treatment (+AT)	650~850	≥310	long. tr. ≥40	≤210

X9CrNiSiNCe21-11-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!