中文版
Home Material DIN EN 10095-2018
简体 | 繁體
Grade X12CrNi 23-13
Germany W-Nr. 1.4833
Corresponding Standard DIN EN 10095-2018
Heat resisting steels and nickel alloys
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 7.9 g/cm3
X12CrNi 23-13 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni N
Minimum Value - - - - - 22 12 -
Maximum Value 0.15 1 2 0.045 0.015 24 14 0.11
X12CrNi 23-13 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Flat steel; t≤75 Solid Solution Treatment (+AT) 500~700 ≥210 Long Products
≥35		 ≤192
Flat steel; 0.5≤t<3 Solid Solution Treatment (+AT) 500~700 ≥210 long. tr.
≥33		 ≤192
Flat steel; t ≥ 3 Solid Solution Treatment (+AT) 500~700 ≥210 long. tr.
≥35		 ≤192
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
06Cr23Ni13
(0Cr23Ni13) 		S30908 309S SUS 309S STS 309S 309S S30908 X12CrNi 23-13
X6CrNi23-13 		X7CrNi 23-14 1.4833 Z15CN 24-13 X12CrNi 23-13
X6CrNi23-13 		1.4833
1.4950 		10Х23Н13
2 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
06Cr23Ni13
(0Cr23Ni13) 		S30908 309S SUS 309S STS 309S 309S S30908 X12CrNi 23-13 X7CrNi 23-14
X12CrNi 23-13 		1.4833
1.4833 		Z15CN 24-13 X12CrNi 23-13 1.4833 10Х23Н13
X12CrNi23-13 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X12CrNi 23-13 1.4833
2 ISO 4955-2005
X12CrNi23-13 (15)
3 EN 10296-2-2005
X12CrNi23-13 1.4833
4 DIN EN 10095-2018
X12CrNi 23-13 1.4833
5 NF EN 10088-1-2005
X12CrNi23-13 1.4833
6 NF EN 10296-2-2005
X12CrNi23-13 1.4833
7 DIN EN 10296-2-2006
X12CrNi23-13 1.4833

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!