中文版
Home Material DIN EN 10095-2018
简体 | 繁體
Grade X10NiCrAlTi 32-21
Germany W-Nr. 1.4876
Corresponding Standard DIN EN 10095-2018
Heat resisting steels and nickel alloys
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 8 g/cm3
X10NiCrAlTi 32-21 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Ti Al
Minimum Value - - - - - 19 30 0.15 0.15
Maximum Value 0.12 1 2 0.03 0.015 23 34 0.6 0.6
X10NiCrAlTi 32-21 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Reduction of Area
ψ
% 		Hardness
HBW
Bars; t≤160 Solid Solution Treatment (+AT) 450~680 ≥170 ≥30 ≤192
1 Approximate Comparison Table Deformed High-Temperature Alloy
China Japan United States Germany France United Kingdom
GB JIS Commercial Grade AMS DIN EN/DIN W-Nr. NF EN/NF Commercial Grade
(GH20) NCF 800B
NCF 2B 		Incoloy 800 5766
5871 		X10NiCrAlTi 32-20 1.4876 25NC 35-20
Nicral C 		Incoloy 800
2 Approximate Comparison Table Corrosion-Resistant Alloy
China Japan South Korea United States Germany United Kingdom
GB ISC JIS KS Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS 1101
(NS 111)
(0Cr20Ni32AlTi) 		H 08800
H 01101 		NCF 800
(NCF 2B) 		NCF 800 Incoloy 800 N 08800 X10NiCrAlTi 32-20 1.4876 NA 15
3 Approximate Comparison Table Corrosion-Resistant Alloy
China United States Germany United Kingdom
GB ISC Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS 1102
(NS 112)
(1Cr20Ni32AlTi) 		H 08810
H 01102 		Incoloy 800H N 08810 X10NiCrAlTi 32-20 1.4876 NA 15
X10NiCrAlTi32-21 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X10NiCrAlTi 32-21 1.4876
2 DIN EN 10095-2018
X10NiCrAlTi 32-21 1.4876

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!