X6NiCrSiNCe 35-25 1.4854 - DIN EN 10095-2018

Grade	X6NiCrSiNCe 35-25
Germany W-Nr.	1.4854
Corresponding Standard	DIN EN 10095-2018 Heat resisting steels and nickel alloys
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X6NiCrSiNCe 35-25 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.04	1.2	-	-	-	24	34	0.12	0.03
Maximum Value	0.08	2	2	0.04	0.015	26	36	0.2	0.08

X6NiCrSiNCe 35-25 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Coil bars, profiles; t≤25	Solid Solution Treatment (+AT)	650~850	≥300	Long Products ≥40	≤210
Coil, Profile; 0.5≤t<3	Solid Solution Treatment (+AT)	650~850	≥300	long. tr. ≥40	≤210
Coil, Profile; t≥3	Solid Solution Treatment (+AT)	650~850	≥300	long. tr. ≥40	≤210

X6NiCrSiNCe35-25 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!