X10NiCrSi 35-19 1.4886 - DIN EN 10095-2018

Grade	X10NiCrSi 35-19
Germany W-Nr.	1.4886
Corresponding Standard	DIN EN 10095-2018 Heat resisting steels and nickel alloys
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X10NiCrSi 35-19 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	1	-	-	-	17	33	-
Maximum Value	0.15	2	2	0.03	0.015	20	37	0.11

X10NiCrSi 35-19 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Coil bars, profiles; t≤25	Solid Solution Treatment (+AT)	500~650	≥270	≥40	≤200

Approximate Comparison Table Corrosion-Resistant Alloy

China		United States	International Organization for Standardization	Germany		France	European Standard		Sweden
GB	ISC	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	SS
NS 1105	H 08330	N 08330	X 6 NiCrSi 36-19	X10NiCrSi 35-19	1.4886	X10NiCrSi 35-19	X10NiCrSi 35-19	1.4886	X10NiCrSi 35-19

X10NiCrSi35-19 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!