NiCr20Ti 2.4951 - DIN EN 10095-2018

Grade	NiCr20Ti
Germany W-Nr.	2.4951
Corresponding Standard	DIN EN 10095-2018 Heat Resisting Steels and Nickel Alloys
Classification	Alloy Steel
Properties	Corrosion Resistance
Density	8.4 g/cm³

NiCr20Ti Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Ti	Co	Al	More
Minimum Value	-	0.08	-	-	-	-	18	-	0.2	-	-	Ni:余量
Maximum Value	5	0.15	1	1	0.02	0.015	21	0.5	0.6	5	0.3	Ni:余量

NiCr20Ti Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Flat steel; t≤75	Solid Solution Treatment (+AT)	650~850	≥240	* ≥30	≤230
Bars; t≤160	Solid Solution Treatment (+AT)	650~850	≥240	≥30	≤230
Coil bar; t≤25	Solid Solution Treatment (+AT)	650~850	≥240	≥30	≤230

1 Approximate Comparison Table Deformed High-Temperature Alloy

2 Approximate Comparison Table Deformed High-Temperature Alloy

NiCr20Ti Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!