45NiCrMo 16 1 .2767 - DIN EN ISO 4957-2018

Grade	45NiCrMo 16
Germany W-Nr.	1 .2767
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

45NiCrMo 16 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo
Minimum Value	0.4	0.1	0.2	-	-	1.2	3.8	0.15
Maximum Value	0.5	0.4	0.5	0.03	0.03	1.5	4.3	0.35

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

45NiCrMo 16 Mechanical Properties

	Reduction of Area ψ %
Annealed (+A)	≤285
Quenching and Tempering	HRC ≥52

New and Old Grade Replacement List

Corresponding Standard	Grade
DIN 17350-1980	Grade Germany W-Nr.
DIN EN ISO 4957-2018	Grade Germany W-Nr.

Approximate Comparison Table Alloy Cold-Work Tool Steel

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
45NiCrMo16	45NiCrMo16 (X45NiCrMo 4)	1.2767	45NiCrMo16	1.2767

45NiCrMo16 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	45NiCrMo 16 1 .2767
2	ISO 4957-2018
	45NiCrMo 16 1 .2767

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!