HS 6-5-2C 1.3342 - DIN EN ISO 4957-2018

Grade	HS 6-5-2C
Germany W-Nr.	1.3342
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	8.2 g/cm³

HS 6-5-2C Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	W	V
Minimum Value	0.86	-	-	-	-	3.8	4.7	5.9	1.7
Maximum Value	0.94	0.45	0.4	0.03	0.03	4.5	5.2	6.7	2.1

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

HS 6-5-2C Mechanical Properties

	Hardness HBW
Soft annealing (+A)	≤269
Quenching and Tempering	HRC ≥64

Approximate Comparison Table High-Speed Steel 2

China		United States		Germany		France
GB	ISC	ASTM	UNS	DIN EN/DIN	W-Nr.	NF EN/NF
CW6Mo5Cr4V2	T66542	M2(高C)	T11302	SC 6-5-2	1.3342	HS 6-5-2C

HS6-5-2C Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	HS 6-5-2C 1.3342
2	ISO 4957-2018
	HS 6-5-2C 1.3342

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!