HS 0-4-1 1.3325 - DIN EN ISO 4957-2018

Grade	HS 0-4-1
Germany W-Nr.	1.3325
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

HS 0-4-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V
Minimum Value	0.77	-	-	-	-	3.9	4	0.9
Maximum Value	0.85	0.65	0.4	0.03	0.03	4.4	4.5	1.1

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

HS 0-4-1 Mechanical Properties

	Hardness HBW
Softening Annealed	≤262
Quenching and Tempering	HRC ≥60

Approximate Comparison Table High-speed tool steels

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
HS0-4-1	HS0-4-1	1.3325	HS0-4-1	1.3325

HS0-4-1 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	HS 0-4-1 1.3325
2	ISO 4957-2018
	HS 0-4-1 1.3325

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!