105V 1.2834 - DIN EN ISO 4957-2018

Grade	105V
Germany W-Nr.	1.2834
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

105V Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	V
Minimum Value	1	0.1	0.1	-	-	0.1
Maximum Value	1.1	0.3	0.4	0.03	0.03	0.2

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

105V Mechanical Properties

	Hardness HBW
Soft annealing (+A)	≤212
Quenching and Tempering	HRC ≥61

Approximate Comparison Table Alloy Cold-Work Tool Steel

Japan	International Organization for Standardization	Germany		European Standard
JIS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
SKS43	105V	105V	1.2834	105V	1.2834

105V Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	105V 1.2834
2	ISO 4957-2018
	105V 1.2834

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!