50WCrV8 1.2549 - DIN EN ISO 4957-2018

Grade	50WCrV8
Germany W-Nr.	1.2549
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	8 g/cm³

50WCrV8 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	W	V
Minimum Value	0.45	0.7	0.15	-	-	0.9	1.7	0.1
Maximum Value	0.55	1	0.45	0.03	0.03	1.2	2.2	0.2

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

50WCrV8 Mechanical Properties

Heat treatment	Hardness HBW
Soft annealing (+A)	≤229
Quenched and tempered*	HRC ≥56

Approximate Comparison Table Alloy Cold-Work Tool Steel

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
5WCrV8	5WCrV8	1.2549	5WCrV8	1.2549

50WCrV8 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	50WCrV8 1.2549
2	ISO 4957-2018
	50WCrV8 1.2549

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!