95MnWCr5 1.2825 - DIN EN ISO 4957-2018

Grade	95MnWCr5
Germany W-Nr.	1.2825
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

95MnWCr5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	W	V
Minimum Value	0.9	0.1	1.05	-	-	0.4	0.4	0.05
Maximum Value	1	0.4	1.35	0.03	0.03	0.65	0.7	0.2

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

95MnWCr5 Mechanical Properties

	Hardness HBW
Soft annealing (+A)	≤229
Quenching and Tempering	HRC ≥60

Approximate Comparison Table Alloy Cold-Work Tool Steel

China	International Organization for Standardization	Germany		European Standard
GB	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
MnCrWV	95MnWCr5	95MnWCr5	1.2825	95MnWCr5	1.2825

95MnWCr5 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	95MnWCr5 1.2825
2	ISO 4957-2018
	95MnWCr5 1.2825

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!