X100CrMoV5 1.2363 - DIN EN ISO 4957-2018

Grade	X100CrMoV5
Germany W-Nr.	1.2363
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

X100CrMoV5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V
Minimum Value	0.95	0.1	0.4	-	-	1.8	0.9	0.15
Maximum Value	1.05	0.4	0.8	0.03	0.03	5.5	1.2	0.35

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

X100CrMoV5 Mechanical Properties

	Hardness HBW
Soft annealing (+A)	≤241
Quenching and Tempering	HRC ≥60

1 Approximate Comparison Table Alloy Cold-Work Tool Steel

Japan	International Organization for Standardization	Germany		European Standard
JIS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
SKD12	X100CrMoV5	X100CrMoV5	1.2363	X100CrMoV5	1.2363

2 Approximate Comparison Table Alloy Tool Steel 1

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Sweden

United Kingdom

ISC

CNS

JIS

ASTM

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

BS EN/BS

Cr5Mo1V

T20503

SKD 12

STD 12

T30102

X100CrMoV5

X100CrMoV5-1

1.2363

X100CrMoV5

2206

X100CrMoV5
BA2

3 Approximate Comparison Table Alloy Tool Steel 2

China	Japan	United States	Germany		France	United Kingdom
GB	JIS	ASTM	DIN EN/DIN	W-Nr.	NF EN/NF	BS EN/BS
Cr5Mo1V	SKD 12	A2	X100CrMoV5 1	1.2363	Z38CDV5	BA2

X100CrMoV5 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	X100CrMoV5 1.2363
2	ISO 4957-2018
	X100CrMoV5
3	NF A 35-590-1992
	X100CrMoV5 (Z100CDV5)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!