35CrMo7 1 .2302 - DIN EN ISO 4957-2018

Grade	35CrMo7
Germany W-Nr.	1 .2302
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

35CrMo7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo
Minimum Value	0.3	0.3	0.6	-	-	1.5	0.35
Maximum Value	0.4	0.7	1	0.03	0.03	2	0.55

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

35CrMo7 Mechanical Properties

Hardness HBW
300

Approximate Comparison Table Alloy Cold-Work Tool Steel

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
35CrMo7	35CrMo7	1.2302	35CrMo7	1.2302

35CrMo7 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	35CrMo7 1 .2302
2	ISO 4957-2018
	35CrMo7 1 .2302

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!