30CrNiMo8 1.6580 - EN ISO 683-2-2018

Grade	30CrNiMo8
European Standard Steel Grade	1.6580
Corresponding Standard	EN ISO 683-2-2018 Heat-Treatable Steels,Alloy Steels and Free-Cutting Steels--Part 2：Alloy Steels for Quenching and Tempering
Classification	Alloy Steel

30CrNiMo8 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	0.26	0.1	0.5	-	-	1.8	1.8	-	0.3
Maximum Value	0.34	0.4	0.8	0.025	0.035	2.2	2.2	0.4	0.5

30CrNiMo8 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, flat material, forging; d≤16 or t≤8	Quenching and Tempering (+QT)	1030~1230	≥850	≥12	≥40	-	-
Bar, flat material, forging; 16<d≤40 or 8<t≤20	Quenching and Tempering (+QT)	1030~1230	≥850	≥12	≥40	-	≥30
Bar, flat material, forging; 40<d≤100 or 20<t≤60	Quenching and Tempering (+QT)	980~1180	≥800	≥12	≥45	-	≥35
Bars, flat products, forgings; 100<d≤160 or 60<t≤100	Quenching and Tempering (+QT)	980~1180	≥800	≥12	≥50	-	≥45
Bars, Flats, Forgings; 160<d≤250 or 100<t≤160	Quenching and Tempering (+QT)	930~1130	≥750	≥12	≥50	-	≥45
Bars, flat products, forgings, semi-finished products, rebar	Soft Annealing (+A)	-	-	-	-	≤248	-

1 Approximate Comparison Table Alloy Steel for Quenching and Tempering

China		Japan	International Organization for Standardization	Germany		European Standard
GB	ISC	JIS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
30Cr2Ni2Mo	A50300	SNCM431	30CrNiMo8	30CrNiMo8	1.6580	30CrNiMo8	1.6580

2 Approximate Comparison Table Structural Alloy Steel

China	Japan	International Organization for Standardization	Germany	France	European Standard		Russia	United Kingdom
GB	JIS	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
30Cr2Ni2Mo	SNCM431	31CrNiMo8	30CrNiMo8	30CND8	30CrNiMo8	1.6580	3KH3M3F	823M30

3 Approximate Comparison Table Hot Work Tool Steel

Japan	United States		Germany		France	European Standard		Russia	United Kingdom
JIS	ASTM/AISI	UNS	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
SDK62 SDK7	H10 H12	T20810	30CrMoV12 45WCrV7 X30WCrV5-3 X30WCrV9-3 X32CrMoV3-3	1.2365	32CDV12-28 32CrMoV12-28 Z35CWDV5	30CrMoV12-11 30CrNiMo8 32CrMoV12-28	- 1.6580 1.2365	3Х3М3Ф 3KH3M3F	2365 BH10 BH12

4 Approximate Comparison Table Alloy Tool Steel 3

Japan	United States		Germany		France	European Standard		Russia	United Kingdom
JIS	ASTM	AISI	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
SKD62 SKD7	H10 H12	T20810	X32CrMoV3-3 45WCrV7 X30WCrV5-3 X30WCrV9-3 30CrMoV12	1.2365	32CDV12-28 32CrMoV12-28 Z35CWDV5	32CrMoV12-28 30CrNiMo8 30CrMoV12-11	1.2365 1.6580	3Х3М3Ф 3KH3M3F	2365 BH10 BH12

30CrNiMo8 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!