DC07 1.0898 - EN 10130-2006

Grade	DC07
European Standard Steel Grade	1.0898
Corresponding Standard	EN 10130-2006 Cold rolled low carbon steel flat products for cold forming-Technical delivery condition
Classification	Alloy Steel

DC07 Chemical Element Composition Content (%)

Component	C	Mn	P	S	Ti
Minimum Value	-	-	-	-	-
Maximum Value	0.01	0.2	0.02	0.02	0.2

DC07 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Cold-rolled flat material; flat; t ≥ 0.35 or w ≥ 600	250~310	100~150	≥44

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

DC07 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!