中文版
Home Material ISO 4957-2018
简体 | 繁體
Grade HS 18-0-1
ISO Numeric Designation 1.3355
Corresponding Standard ISO 4957-2018
Tool Steels
Classification Alloy Steel
Density 8.7 g/cm3
HS 18-0-1 Chemical Element Composition Content (%)
Component C Si Mn P S Cr W V
Minimum Value 0.73 - - - - 3.8 17.2 1
Maximum Value 0.83 0.45 0.4 0.03 0.03 4.5 18.7 1.2
HS 18-0-1 Mechanical Properties
Hardness
HBW
Softening Annealed ≤269
Quenching and Tempering HRC
≥63
1 Approximate Comparison Table High-Speed Tool Steels
Japan International Organization for Standardization Germany European Standard
JIS ISO DIN EN/DIN W-Nr. EN Numerical Grade
SKH2 HS18-0-1 HS18-0-1 1.3355 HS18-0-1 1.3355
2 Approximate Comparison Table High-Speed Tool Steels
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS14 BS EN/BS
W18Cr4V SKH
SKH2 		T1 HS18-0-1 HS18-0-1 Z80WCV18-04-01 HS18-0-1 1.3355 R18 2750 BT1
3 Approximate Comparison Table High-Speed Tool Steels
China Japan South Korea United States International Organization for Standardization Germany United Kingdom
GB JIS KS ASTM ISO DIN EN/DIN BS EN/BS
W18Cr4V SKH2 SKH2 T1 HS18-0-1 S18-0-1 BT1
4 Approximate Comparison Table High-Speed Steel 2
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF GOST SS14 BS EN/BS
W18Cr4V T51841 SKH 2 SKH 2 SKH 2 T1 T12001 HS 18-0-1 S 18-0-1 1.3355 HS 18-0-1 Р18 2750 HS 18-0-1
BT1
HS18-0-1 Corresponding Standards(Same grade name, different standards)
1 DIN EN ISO 4957-2018
HS 18-0-1 1.3355
2 ISO 4957-2018
HS 18-0-1 1.3355

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!